The electrical substation is a major part of the map which you must activate by completing several missions across the game. This article will show how to find and complete these missions, as well as walkthroughs for each one.
The “dying light 2 activate the electrical substation bug” is a problem that has been present in the game. It has been reported that this bug can be fixed by doing one of two things: 1) Using the console command “disable_power_to_electrical_substation”, or 2) Entering the password for the Electrical Substation as your character’s name.
In Dying Light 2, the Downtown Electrical Substation is most likely the first of these Facilities you’ll activate. It’s part of the A Place to Call Home campaign quest, and if you receive the paraglider and learn how to operate it, you’ll instantly arrive to its location.
To restore electricity, each Electrical Substation requires you to connect particular generators/terminals located across the facility to one another. As part of Dying Light 2’s City Alignment system, after you’ve restored power, you’ll be able to designate the Facility to either the Survivors or the Peacekeepers.
This Dying Light 2 walkthrough will show you how to activate the Downtown Electrical Substation and where to find the Inhibitor within. Here’s how to activate the Substation in Garrison if you’re seeking for additional options.
In Dying Light 2, how do you activate the downtown electrical substation?
You’ll be confronted by a gang of PKs when you arrive at the site during A Place to Call Home and attempt to enter via the front door. Make contact with them. There will be a battle against a gang of Renegades towards the conclusion of your chat. Defeat them, then talk with the PKs again to begin the Substation activation process.
Turn left while facing the PKs at the front of the Substation to find a shack with a ramp in front of it. Climb to the shack’s roof and then to the right to the metal trusses. Follow the trusses to the right and leap over to a protruding wooden platform.
Climb to the top of the yellow pipe and follow it around to a second wooden platform. Grab the next golden pipe and leap across to another wooden platform with a shattered window through which you may enter. Drop down to the lowest level once you’re inside.
Take the first wire from the western wall’s green Terminal 1. Take it behind you to the red Terminal 1, immediately before the turbine and crates. Turn around and descend the stairs to the right of the original green Terminal 1 building.
Terminal 3 will be green. Turn right after grabbing the wire. Return to the level above by ascending the elevator shaft. Connect the cable to the red Terminal 3 (which is behind the previously red Terminal 1), which is located behind the previously red Terminal 1.
Return to the old green Terminal 1 and take the right stairs up. To locate green Terminal 2, travel up two stories and then left. Exit onto the balcony and swing across to the platform above the turbine on the lower level using the rope. Hook the cable to red Terminal 2 via the twin doors on the left.
The Downtown Electrical Substation will be activated as a result of this. After there, an elevator will take you to the first level (with the turbine). It’s to the right of Terminal 3’s original red color. It may be used to go to the Control Room.
Grab the Inhibitor beyond the Control Room first, then activate the switch specified by the goal marker when you arrive. You’ll have to climb back down and utilize the pulley lift to obtain the Inhibitor until you activate the switch, which will start a cutscene that brings you to the top of the Substation. It just saves you one step.
Assign the substation to Survivors or Peacekeepers, whichever Faction you like. It makes no difference whether the narrative has several endings or not.
And that’s that on In Dying Light 2, how do you activate the downtown electrical substation?. This certainly isn’t the trickiest wire puzzle in the game; the one in Houndfield is a bit dicier. Either way, now you know how to activate these facilities and other terminals found around Villedor. For more tips and walkthroughs, head over to our DL2 help hub right here.
The “dying light 2 downtown electrical station” is the key location in Dying Light 2. If you want to complete the game, you must activate it by completing a quest.
Related Tags
- dying light 2 broadcast substation safe code
- dying light 2 electrical station elevator not working
- dying light 2 garrison electrical station
- dying light 2 electrical station locations
- dying light 2 electrical station glitch
